Wall canopy

The Wall Shelter is designed as a shelter for doors and windows to protect them against weathering from atmospheric exposure.

The gazebo is made up of first quality laminated wooden beams, mechanically cut, with all the joints needed to facilitate mounting and to make mounting exclusively possible with an electric drill. The beams are also custom-made (they need not be cut) and so need only to be nailed down. All the wooden parts are painted with solvent impregnated resins for greater protection against environment agents or weathering.

Through our website you can choose:

1 - If only to buy the structure or also the upper finishing,

(construction boards, sheathing, bituminous adhesive, canadian tiles)

The kit contains all hardware required for monting and the instructions booklet.

TECHNICAL CHART

The shelter, like all our products, is very solid, so therefore the sections are of superior quality compared to others on the market.

Laminated Wood

Type GL24 laminated wood is produced from red spruce wood with slats 40 mm thick, including their finger-joints. The strips are glued together using water-resistant adhesives in accordance with UNI EN 1194 and EN 1408-1. These are formaldehyde-free glues (emission class 0). The laminated wood is dried to obtain a humidity ideal for the assembly phase (assemblage). In this way natural swelling and shrinkage phenomena are contained, reducing deformability and the formation of cracks that could arrive with time.

Finally, the wood has an excellent resistance to fire since it burns very slowly, as the carbonization proceeds from the outside inwards and accordingly the not yet carbonized wood maintains its efficiency.

Wooden Boards

The wooden boards are 400/300 x 12 x 2,2 cm, and are obtained by the planing and processing of rough planks of the red spruce tree. The humidity of the wood has been reduced to 14% ± 2% in order to minimize natural deformations and to allow the three grooves on the lower part to reduce the tension in the fibers.

Canadian Tiles

The top coating is formed by sheets of bituminous tiles consisting of a mineral coating in colored grit or natural slate that covers the upper side by a double reinforcement of a glass veil impregnated by a bituminous mass, protected by a polyethylene film on the lower side. It comes in rigid plates and flaps.

Canadian tiles must be spread over a sheet of a bituminous thermo-adhesive sheath. The coating, if desired, can also be made by coating a roll slated bituminous adhesive sheath.

The gazebo is calculated by the following measurement values:

IMAGES

Some examples of how our anchors and joints look: